All Categories

Home> Blogs> Precautions for installation of high pressure hose fittings

Precautions for installation of high pressure hose fittings

2022-08-30 Page view : 4 views

(1) Rubber hose in moving or stationary, can not be overly bent, can not bend at the root, at least 1.5 times the diameter of the beginning of the bending;

(2) When the rubber hose moves to the extreme position, it should not be pulled too tight and should be more relaxed;

(3) Try to avoid torsional deformation of rubber hose;

(4) hose as far as possible away from the thermal radiation component, it is necessary to fashion heat insulation board;

(5) The external damage of the rubber hose should be avoided, such as long-term friction on the surface of the same component in use;

(6)If the hose weight causes excessive deformation, there should be supporting parts.
Zhuji Tianli Machinery Co., Ltd. is a medium-sized enterprise in Zhuji City. Founded in 1985, the company has become the largest manufacturer of hydraulic hose assemblies, hose fittings and adapters in the Middle East. Our adapters are available bsp thread fittings and metric thread bite type tube fitting,etc. If you need, please contact our fitting manufacturer.